Description
✅ Installed with 32-bit 64MHz ARM® Cortex-M0+ STM32G0B1VET6 chip, more stable and faster.
✅ Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4,definitely, CB1. Also, a screw-reinforced installation is also avaliable.
✅ It has rich expansion ports, can support various expansion modules, such as BL Touch, LCD screen, RGB light, auto shutdown, etc.
✅ TPS5450-5A Power Chip The 5A output perfectly matches the power supply need of Raspberry Pi.
✅ Selectable CNC fan voltage, 5V/12V/24V.
✅ Added eFuse circuit protection. It will faster disconnected on overload, and automatically reset if the overload is gone, which will greatly reduce the motherboard burnout caused by short circuits or ignition.
✅ Reserved Can Bus port can be connected with EBB CAN, which will simplify the wiring and provide strong anti-interference ability.
🌟The M8P & CB1 can be the best choice for Voron 2.4, VzBot, etc.
https://github.com/bigtreetech/Manta-M8P
Specifications
| Manta M8P V1.1 | |
| MCU | STM32G0B1VET6 |
| Frequency | 64 MHz |
| Size | 170 x 102.7 mm |
| Driver Slot | 8 |
| eFuse | √ |
| Fan Port | 2 pins PWM Fan x 5 4pins PWM Fan x 2 Always on Fan x 1 SoC Fan x 1 |
| Fan Voltage Selection (24V,12V,5V) | √ |
| Heater Cartridge Connector | 4 |
| Thermistor | 100K NTC x 5 |
| USB | 1 USB-OTG or UART to USB 3 USB-Host 2.0 |
| HDMI | Micro HDMI x 3 |
| CAN bus Interface | √ |