Technical Specification

LGX™ EXTRUDER
  • e-steps value : 400 on 16 bit micro-stepping setups; 800 on 32 bit micro-stepping setups.
  • Drive wheels : hardened steel;
  • Materials compatibility : abrasive; rigid; semi-flexible; flexible; and soft.
  • Mounting holes : M3
  • Mounting patterns : bottom anterior (2 points); left (2 points), right (2 points), front (4 points), back (4 points)
  • Holes on the sides of the LGX™ : 5 mm depth
  • Holes on the bottom of the LGX™ : 12 mm depth
  • Max tightening torque on all screws is 0.3 Nm
  • retraction speed : 35 mm/s
  • retraction distance (bowden) : ~5 mm (0.4 + tube length x 0.15)
  • retraction distance (direct drive) for rigid materials : 0.4 mm
  • retraction distance (direct drive) for soft materials : 3 mm
  • Max operating temperature : 80°C
  • LGX™ DD net weight : 218.6 g
  • LGX™ B net weight : 224 g
  • Package measurements : 80x103x73 mm
  • Package weight : 269 g
  • Download the LGX Technical Drawings here.
LDO STEPPER MOTOR FOR BONDTECH LGX
  • PH-06AWJ connector
  • 2 phases
  • DC 5.5 V
  • Max 1.0A/phase
  • Max recommended environment : 70°C
  • Download the stepper motor Technical Data Sheet here.

STEP Files To Download

Click the links below to download STEP files with simplified geometries of each available setup.